Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateSchlage Locksmith in Ravenna, MI | Squire Locksmith
We’re Schlage specialists and an independent locksmith shop servicing Schlage hardware across Ravenna, MI and western Michigan. The short answer: yes, we rekey, repair, and install Schlage locks in Ravenna, and the thing that sets our work apart here is that we’re equally comfortable with a brand-new B60 deadbolt and a sixty-year-old Schlage mortise lock that hasn’t been touched since Eisenhower was president. Glen Kowalski runs the shop, and his crew has spent years working on the exact Schlage models that dominate this area’s mid-century homes and farmsteads. We stock OEM components, we cut keys on site, and we answer the phone when you call (866) 361-1189.
Why Ravenna Residents Choose Us for Schlage Service
Ravenna isn’t a subdivision town. The houses here were built when Schlage meant solid brass and a key that weighed something in your pocket. We know those locks because we’ve rekeyed hundreds of them. From B60 deadbolts on front doors to A Series knobs on bedroom doors to Camelot handlesets that have seen thirty Michigan winters, we’ve had our hands on all of it. Glen grew up in the Marble School Road corridor of Okemos and learned early that understanding how a lock fails is the same as understanding how it works. That’s why we don’t just swap parts. We figure out what caused the failure so the fix lasts.
We’re not a manufacturer-authorized service center, and we won’t pretend to be. What we offer is hands-on experience with Schlage’s full range. We rekey, change, and duplicate keys for Schlage hardware every week across the 49451 ZIP. We use OEM Schlage cylinders, keys, and electronic modules whenever they’re available, and quality aftermarket replacements only for discontinued parts. The lock that gives you trouble is usually the one nobody’s touched in fifteen years, and that tells you something.
Styles & brands we work with







Common Schlage Locksmith Problems We Solve in Ravenna
Here’s what we see most often when we pull up to homes and farmsteads around Ravenna:
- Frozen and stiff Schlage B60 deadbolt cylinders. Ravenna’s freeze-thaw cycles push moisture into the cylinder, and when it drops below 20 degrees, the pins bind and the key won’t turn. We disassemble, clean out the old grease and grit, and re-lubricate with graphite or dry PTFE. Keys turning smooth again, same day.
- Corroded and pitted Schlage exterior finishes. Humid summers here do a number on knob and lever finishes, especially on west-facing doors that catch the afternoon sun and evening damp. Pitting makes the hardware look bad, but worse, it makes the turn mechanism catch. We can clean and recondition what’s salvageable or replace the hardware if the finish is gone.
- Worn spindles and loose roses on Schlage A Series knob sets. Mid-century Ravenna homes still have original A Series knobs, and after fifty-plus years, the spindles wear down and the roses work loose. We shim, tighten, and replace internal components so the knobs stop wobbling and the latch actually engages.
- Sticky or unresponsive Schlage Plymouth keypad deadbolts. Road salt and grit from winter roads get tracked onto keypad buttons, and the salt works its way into the membrane. Codes get missed, batteries drain prematurely. We clean the keypad, check the module, and replace the battery pack if needed.
- Keys that work in one lock but not the matching one. Older Schlage locks often get rekeyed one at a time over the years, and eventually you’ve got three keys for three doors. We can rekey all of your Schlage hardware to a single key, or match a new Schlage deadbolt to your existing house key. One key. Every door.
Schlage Service in Ravenna: What Local Conditions Mean for Your Equipment
Here’s a thing you won’t read on a generic Schlage in Fruitport page. Ravenna has a lot of farmsteads and detached garages still using antique padlocks and hasps that haven’t been manufactured in decades. When a homeowner here wants to upgrade to a Schlage deadbolt on the house and also secure the barn, you can’t just drill a new hole and call it done. The old hasp has a bolt pattern from 1938, and the Schlage padlock you bought at the hardware store doesn’t line up. We fabricate custom steel backing plates so modern Schlage padlocks mount cleanly over the original antique hasp without wrecking the door or the frame. In-town houses have their own quirk, too: many of the older homes in the 49451 ZIP have Schlage mortise locks with non-standard backsets, which means replacement hardware often needs custom strike fitting rather than an off-the-shelf swap. That’s the kind of work we do regularly here.
We recently rekeyed a Schlage B60 deadbolt and matched keys for a farmhouse on the east side of Schlage in Coopersville. The homeowner also wanted the barn secured. Our tech fabricated a steel backing plate to mount a modern Schlage padlock over the original antique hasp, then duplicated keys for both the house and the outbuilding. Everything worked smoothly through the rest of the freeze-thaw season.
Schlage Models & Products We Service in Ravenna
We work on Schlage’s common residential hardware and its older legacy lines. That includes the B60 Series deadbolt, the A Series knobs and lever sets, Camelot handlesets, and Plymouth keypad deadbolts. For electronic Schlage products, we use OEM modules where Schlage still makes them, and quality aftermarket equivalents for discontinued units. We keep common Schlage key blanks, cylinders, and small parts on the truck, which means a typical Ravenna rekey or deadbolt replacement doesn’t wait on a parts order. If your Schlage mortise or rim lock dates back a few decades, we repair and rekey the original hardware instead of pushing a full replacement. Some of that old brass is better than anything you can buy today.
Schlage Service Pricing in Ravenna
Service calls in Ravenna typically start at $45 to $75, depending on where in the 49451 ZIP you live and what the job involves. Rekeying a Schlage lock usually runs $25 to $45 per cylinder, plus the service call. A new Schlage B60 deadbolt installed runs roughly $110 to $200, including hardware and labor. Keypad deadbolts run higher, usually $180 to $350 depending on the model. If we’re fabricating mounting hardware, like the barn plate I described, that’s quoted after we see the door. There’s no call-out surcharge when we arrive. The price we quote on the phone is the price on the invoice. Call (866) 361-1189 for a free estimate before anyone is dispatched.
Serving Ravenna, MI — Our Local Coverage Area
We’re based in the Ravenna area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Schlage Locksmith in Ravenna
Usually, yes. The sticking almost always comes from old grease, dust, and moisture inside the cylinder. Cold weather turns that gunk stiff, and the pins won’t move. We disassemble the cylinder, clean it thoroughly, and re-lubricate with a dry PTFE or graphite. If the cylinder is too worn, we’ll cut you new keys and drop in an OEM Schlage replacement cylinder. Either way, the full cost is quoted on the phone before we head out. Call (866) 361-1189.
Yes. A Series knobs and levers are durable hardware, but after fifty-plus years the internal spindles wear and the roses loosen. We repair them in place whenever possible, replacing worn spindles and using shims to tighten the mounting. We don’t push a full replacement unless the mechanism itself has failed.
We can, though Schlage service in Wolf Lake often involves custom work. The old hasp on a barn door usually has a bolt pattern that doesn’t align with modern Schlage hardware. We fabricate a steel backing plate so the new lock mounts solidly without damaging the historic door. The keypad still gets full weatherproofing, so it holds up through Ravenna winters.
Twice a year is a good rhythm: once in late fall before the freeze-thaw cycle starts, and again in late spring after the winter road salt and grit have had their run. We use dry lubricants. Wet oils just collect dust and turn into paste. If you’re not comfortable doing this yourself, we can schedule it as part of a quick maintenance call.
We cut Schlage keys on site, including SC1 and SC4 blanks, which cover most residential Schlage hardware. Some restricted or high-security blanks require authorization cards or special equipment, and we’ll tell you straight away if we can or can’t cut a particular key. Same-day key duplication is available, and estimates are free at (866) 361-1189.
Service Areas Near Ravenna
We serve Ravenna and the surrounding communities across western Michigan. If you’re in Lansing, East Lansing, Waverly, Edgemont Park, Fennville, or Beechwood, we cover Schlage work there too. See our Ravenna service area page for full coverage details, or check our Schlage service in Paw Paw and Schlage service in Three Rivers pages if you’re further south.
Book Your Schlage Service in Ravenna Today
If your Schlage lock is sticking, failing, or needs rekeying, call Squire Locksmith at (866) 361-1189. We’ll quote the full price before we dispatch anyone, and same-day service is often available for Ravenna calls. Rekey, don’t replace. Trusted with your access.
Written by Glen Kowalski, Owner at Squire Locksmith, serving Ravenna and western Michigan.