Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in Mason, MI | Squire Locksmith
Medeco locksmith service in Mason covers everything from Maxum deadbolt freeze-ups on West Ash Street to Biaxial rekeys in courthouse office suites. Squire Locksmith provides independent Medeco service across the 48854 ZIP and surrounding township edges, and we’re not manufacturer-authorized; we’re a local shop that stocks OEM-compatible pins and knows these high-security keyways cold. Call (866) 361-1189 and you’ll reach a locksmith who has actually pulled apart a seized Medeco cylinder on a February morning in Mason, not a call center reading from a script.
Why Mason Residents Choose Us for Medeco Service
Medeco cylinders are not Schlage or Kwikset. The pinning geometry is different, the keyway tolerances are tighter, and a sloppy rekey job on a Biaxial means a deadbolt that works for a week and seizes on month three. We’ve worked on Medeco sales & service long enough to know which weatherproofing steps matter and which parts can be re-used. Glen Kowalski, our owner, grew up in the Marble School Road corridor of Okemos and cut his teeth on commercial hardware across Ingham County, so Mason’s mix of courthouse, storefront, and farmhouse lock work is familiar ground for us. When your Medeco lock gives you trouble, you want the tech who understands why it failed, not just someone who can drill it out and sell you a replacement. Our approach starts with a careful diagnosis: can we re-pin it with OEM parts, or has the cylinder worn past the point of being saved? We’ll tell you straight, and that answer shapes the repair.
Styles & brands we work with







Common Medeco Locksmith Problems We Solve in Mason
- Freeze-thaw seizures in Maxum deadbolts. Mid-Michigan winters cycle freeze and thaw repeatedly, and moisture works its way into the keyway of exterior Medeco Maxum deadbolts. When it freezes, the key binds, won’t seat fully, or snaps off in the cylinder. We flush the moisture, re-pin if needed, and recommend a weatherproof lubricant that stops the next seize before it starts.
- Humidity-swollen doors throwing Biaxial deadbolts out of alignment. Summer humidity swells the solid wooden doors common on Mason’s older downtown brick storefronts and farmhouses. When the door frame shifts even an eighth of an inch, the bolt drags against the strike plate and won’t fully throw. We realign the strike, adjust the door, and restore a clean bolt path.
- Sticky rotation and key breakage in M3 restricted keyways. Medeco M3 keyways are tight by design, and on frequently used commercial doors in the courthouse complex that tightness works against you. The keyway wears, rotation gets sticky, and eventually a key snaps inside the cylinder. We extract the broken key, inspect the keyway wear, and either re-pin or recommend replacement before you’re locked out mid-day.
- Internal corrosion in Original Medeco rim and mortise cylinders. Older farmhouse outbuildings and detached garages on Mason’s township edges rarely see heat, so condensation builds inside the lock body. Over years, Original Medeco cylinders corrode internally, pins stick, and the lock either fails open or won’t turn at all. We tear down the cylinder, clean or re-pin with OEM-compatible parts, and advise on weather sealing for the future.
- Master-key system integration in mixed-age buildings. Downtown Mason buildings often carry legacy mortise locks alongside newer Medeco high-security cylinders, and a master-key system has to bridge both. We set up and service master-key hierarchies that keep older hardware functioning while meeting the security bar Medeco imposes. This is not a job for a locksmith who only does Schlage reskins.
Medeco Service in Mason: What Local Conditions Mean for Your Equipment
Here’s what separates Medeco work in Mason from the same job in Lansing or East Lansing Medeco service: the courthouse complex and surrounding downtown create a steady drumbeat of commercial master-key demand, but just a few blocks out you’re handling rural outbuildings with corroded Original cylinders that haven’t seen a service call in fifteen years. Most locksmiths from Lansing drive down, do the commercial job, and head back without ever touching the farmhouse on Barnes Road that needs a Medeco rim cylinder rebuilt. We stay because the work is here. The older downtown brick storefronts hold legacy mortise locks that never got swapped for modern cylindrical hardware, and integrating Medeco cylinders into those mortise bodies requires shims, thread adaptation, and patience that come from years of handling Ingham County’s mixed-age hardware. The same freeze-thaw and humidity cycles hit both worlds, but the failure pattern is different: the courthouse door wears a keyway, the farmhouse door corrodes a cylinder body. Glen Kowalski will tell you the lock that gives you trouble is usually the one nobody’s touched in fifteen years – and that tells you something. In Mason, that lock might be on a courthouse door or a pole barn, and we’ve worked both.
Medeco Models & Products We Service in Mason
We service Medeco Maxum deadbolts, Medeco Biaxial cylinders, Medeco M3 (Medeco3) keyway systems, and Original Medeco rim and mortise cylinders. For high security locks on occupied buildings, we keep OEM Medeco pins, springs, and top pins in the van for same-visit rekeys and repairs. When a part is discontinued or backordered through normal channels, we source aftermarket replacements that hold original tolerances. Rekeying a Medeco lock to match an existing keyway is routine for us, and we’ll tell you honestly whether a worn cylinder should be re-pinned or replaced. For Mason’s commercial clients, master key system design and servicing means we coordinate Medeco high-security keyways with existing hardware rather than forcing a one-brand solution. The parts we stock locally mean fewer multi-day waits for parts from a distributor, which matters when your deadbolt is frozen and the forecast says ten below.
Medeco Service Pricing in Mason
Medeco service in Mason typically runs from $95 to $180 for a standard service call and rekey, while full cylinder rebuilds or replacements on Maxum, Biaxial, or M3 hardware land between $180 and $340 depending on cylinder condition and parts. Master-key system work is quoted per project after a site walkthrough, since the number of doors and existing hardware dictate scope. What drives the cost is cylinder condition: a clean rekey takes thirty minutes, but a corroded Original series tear-down takes longer and uses more parts. We quote a firm price on the phone before anyone is dispatched, and that is the price on the invoice. There is no call-out surcharge added on arrival. Call (866) 361-1189 and tell us what you’re dealing with; estimates are free and you’ll know the number before we head your way.
Serving Mason, MI — Our Local Coverage Area
We’re based in the Mason area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Medeco Locksmith in Mason
Yes, in most cases we free the seized cylinder without replacing the lock. Moisture has infiltrated the keyway and frozen, which binds the key before you can turn it. We thaw the cylinder, flush out the moisture, re-pin with OEM parts if the pins show wear, and apply a weatherproof lubricant. Replacement is a last resort, not the default. Call (866) 361-1189 for a repair quote – estimates are free.
We do. Mason’s courthouse complex and downtown storefronts need master-key systems that integrate Medeco high-security cylinders with existing mortise locks in older brick buildings. We design and service those systems on-site, per door, with a written scope and flat per-lock pricing. A site walkthrough is required first, not a phone estimate. Call (866) 361-1189 to schedule a walkthrough.
Yes. Farmhouse doors and outbuilding padlocks on Mason’s township edges are standard work for us, and Original Medeco rim cylinders in unheated outbuildings often need internal cleaning before rekeying can be done reliably. We’ll assess whether the cylinder can be re-pinned and saved or if corrosion means replacement is the smarter fix, and we’ll tell you which before we start.
Most Medeco rekeys and cylinder rebuilds in Mason are completed same-day during one visit. Corroded Original series cylinders or legacy mortise integrations sometimes need an extra day if sourcing a specific part from a distributor. We’ll tell you the realistic timeline when you call (866) 361-1189, and we don’t pad it.
We stock Medeco-compatible pins, springs, and top pins for Biaxial and Original series work in our service vehicles, which keeps turnaround for Mason jobs short. For discontinued parts that aren’t readily available through normal channels, we source aftermarket replacements that hold original tolerances. If a part isn’t available, we say so and discuss alternatives before the work begins.
Service Areas Near Mason
Beyond Mason service area coverage in 48854, we regularly handle Medeco work in Lansing, East Lansing, and Edgemont Park for commercial and residential clients. We also serve Waverly and the rural township edges between them. For Medeco work further east, see Medeco service in Williamston and Medeco service in Laingsburg.
Book Your Medeco Service in Mason Today
Your Medeco lock doesn’t have to stay unreliable. Call (866) 361-1189, describe what’s happening, and we’ll quote a firm price before anyone heads your way. Same-day service is available for most Mason repairs and rekeys.
Written by Glen Kowalski, Owner at Squire Locksmith, serving Mason since the company’s early days in Medeco in Okemos.